Home Page
About
Products
Specials
Contact


| Body Frame Interior Hardware | Fuel Tanks | New Corvette Parts |
| Power Steering Components | 63-82 Differentials, Suspension, Trailing Arms |
| 84-96 Differentials | 84-96 Brake System Components |

| Home |

1963-1982 Brake System and Related Components

New OEM Master Cylinders
$79.00

1953-1962 Master cylinder assembly
1967-1976 With power brakes
1967-1976 Without power brakes
1977-1982 Without power brakes
Limited Lifetime Warranty


Power Brake Vacuum Booster
Remanufactured OEM units, which add the final link to the brake system.
'63-67 $349.00*
'68-'76 and '77-'82 $199.00*

Power Brake Booster w/ Master Cylinder
Remanufactured OEM brake booster with matched master cylinder, tested as a unit to ensure trouble-free operation and maximum performance. Add $40.00, if core is unavailable or not rebuildable.
1963-1967 Call for Price*
1968-1982 $165.00 / exchange only*

Stainless Steel Flex Braided Brake Lines
$68.00

Set (4) replaces the stock rubber hoses, which deteriorate from the inside, expands and causes a spongy pedal.

Rubber Lines
$20.00 each
Complete Set of Rubber Lines
$80.00

Steel T-Arm Rear Brake Line
$14.00 each

Left or right with spiral armor, pre-formed stainless ending rust deterioration. Mounts over trailing arm to rear caliper.

Pre-Formed Stainless Steel Brake Line Kits
Complete Car Sets
From $105.00

1963 to 1982 pre-formed Stainless Steel brake line with all bends made to exact factory specs and all spiral armor in proper locations. Call for correct application and pricing.

Caliper 2000

90's Technology 1965-1982 Corvette caliper design is the ultimate Stainless Steel lined brake caliper combined with contemporary O-ring piston design.

This piston/seal system, together with sleeved calipers, will eliminate problems of the 1965-1982 Corvette calipers due to any cause of piston movement. Ends soft pedal due to air pumping. Long term storage is no longer a problem, as the seals will not leak. This design offers superior resistance to the induction of dirt and moisture into the caliper, which destroys a stock seal.

Pistons are precision crafted from 6061-T6511 aluminum billet, by a computerized chucker, and are hard coated. The piston and seal is unconditinally guaranteed to be superior to any system on the market for 1965-1982 Corvettes.

  • Totally eliminates air pumping
  • Gives dependability of full floating calipers
  • Maximizes braking potential
  • Eliminates brake squeaking
  • Superior technical design reduces pad wear
  • Offers less rolling resistance -- pads do not drag
  • Improves brake feel and response
  • Completely eliminates leaking brake fluid
  • Upgrades 1965-1982 Corvette caliper technology to contemporary standards
  • Aircraft grade O-ring
  • Fourteen years successful testing
  • Satisfaction guaranteed
  • Lifetime warranty on sleeve, workmanship, piston, and seal
  • NCRS accepted

Caliper 2000
$60.00 each w/exchange*


Premium Caliper Kit
$295.00 w/ exchange*

To make your brake system over-haul easier, kit includes:

  • 4 Ready to bolt on calipers
  • 2 Sets PREMIUM organic brake pads (FT & RR)
  • 8 Mounting bolts and 8 lock washers
  • 4 Pad retaining pins
  • 4 Stainless braided flex brake lines (replaces rubber hoses)
  • D.O.T. approved
  • 2 Copper washers for front line

Master Caliper Kit
$369.00 w/ exchange*

Upgrades the premium caliper kit to also include:

  • New master cylinder
  • 6 Line clips
  • 2 Stainless steel rear pre-form brake lines
Premium Organic Brake Pads
(per 2 wheels) $19.00

Emergency Brake Hardware Kit
$69.00

For both rear wheels, allows stainless steel components to be installed without removing the axle shafts.

Emergency Brake Shoe Set
$69.00

Emergency Brake Rear Cable
$36.00

Connects both rear emergency brakes to the forward cable, and is a complete replacement. State year.

Emergency Brake Front Cable
$16.00

Front or Rear Splash Shield
$36.00

Exact Reproductions. Left or right, rears shields come with brake shoe pivots. Available in Gold Iradite or Zinc Chromate.

'69-'82 Front Spindle Assembly
$325.00 each

Left or right, OEM steering knuckle, spindle, shield and caliper mounting bracket.


Click here for more products

*Indicates items sold on an exchange basis, and cores must be received first for exchange price. Items also sold outright (no core) at higher price. VP reserves the right to refuse as exchange any damaged cores not suitable for safe rebuilding. Sleeved calipers accepted for re-sleeving. Prices subject to change without notice. No refunds - store credit only.

 
Email Us©2000-2004 vettepartsonline.com